7 Best Refrigerator Compressor Capacitors (November 2026)
The best fridge compressor capacitors include the Swess RCO410 3 in 1 Compressor Hard for compatible 115V hard starts, the ATMA SUPPLY W10189190 TSD2 Refrigerator Start Device W10662129 for Whirlpool and Kenmore part matches, and the BOJACK Run Capacitor 120 uF 250V AC for 120 uF motor capacitor needs.
On this page (5 sections)
The best fridge compressor capacitor for most compatible 115V repairs is the Swess RCO410, a 3-in-1 hard start kit for selected 1/4 to 1/3 HP refrigerator and freezer compressors. For related compressor service parts, compare refrigerator compressor access valves.
It combines a relay, overload protector and start capacitor, but it is not a universal fit.
A refrigerator capacitor must match the system's capacitance, voltage, part number and compressor specifications. A correct-looking shape or brand match is not enough.
The products below include hard start kits, relay-and-capacitor assemblies and standalone run capacitors, so identify the failed part before you choose. If the symptom is no cooling, review Midea fridge cooling causes before choosing a part.
If the compressor symptom is unclear, start with our guide on how to fix refrigerator compressor problems. If the appliance recently stopped after a power issue, read How to Reset Your Fridge Compressor: Simple Steps before replacing an electrical part.
Our picks at a glance
-
1
Best for compatible 115V hard startsSwess RCO410 3 in 1 Compressor Hard
9.7/10 our score
See it on Amazon -
2
Best for Whirlpool and Kenmore part matchesATMA SUPPLY W10189190 TSD2 Refrigerator Start Device W10662129
9.7/10 our score
See it on Amazon -
3
Best for 120 uF motor capacitor needsBOJACK Run Capacitor 120 uF 250V AC
9.2/10 our score
See it on Amazon
- 4
Check itKamrexi 2 Pack WPW10350564 W10350564 Refrigerator Compressor
Best for Whirlpool-family 12 uF spares - 5
Check itSeentech 2319792 W10197428 W10189190 TSD2 Overload
Best for matched Whirlpool TSD2 repairs - 6
Check itBlueStars W10613606 Refrigerator Compressor Start Relay
Best for W10613606 replacement matches - 7
Check itFormiden WR55X24064 Refrigerator Capacitor for GE
Best for GE 12 uF capacitor matches
The best fridge compressor capacitor options by repair need
The best choice depends on whether you need a standalone run capacitor, a hard start kit or a matched relay-and-capacitor assembly. We compared the stated electrical values, replacement numbers, connection types, pack contents and compressor limits.
Our score weighs specs, features and buyer feedback against the needs of this search. We did not perform electrical testing, so confirm your original component and refrigerator model before ordering.
| Product | Best for | Voltage | Compressor range | Pack | Our score |
|---|---|---|---|---|---|
| Swess RCO410 3 in 1 Compressor Hard | compatible 115V hard starts | 115V | 1/4 to 1/3 HP | 3 RCO410 kits | 9.7 |
| ATMA SUPPLY W10189190 TSD2 Refrigerator Start Device W10662129 | Whirlpool and Kenmore part matches | 9.7 | |||
| BOJACK Run Capacitor 120 uF 250V AC | 120 uF motor capacitor needs | 250V AC | 9.2 | ||
| Kamrexi 2 Pack WPW10350564 W10350564 Refrigerator Compressor | Whirlpool-family 12 uF spares | 180V AC | 2 capacitors | 9.0 | |
| Seentech 2319792 W10197428 W10189190 TSD2 Overload | matched Whirlpool TSD2 repairs | 1 combination part | 8.9 | ||
| BlueStars W10613606 Refrigerator Compressor Start Relay | W10613606 replacement matches | 2 parts | 8.8 | ||
| Formiden WR55X24064 Refrigerator Capacitor for GE | GE 12 uF capacitor matches | 1 capacitor | 8.3 |
1. Swess RCO410: best for compatible 115V hard starts
Swess RCO410 3 in 1 Compressor Hard: Best for compatible 115V hard starts
- 3-in-1 relay, overload and start capacitor
- 115V operation
- For 1/4 to 1/3 HP compressors
- 243 to 292 MFD capacitance
This 3-in-1 kit suits compatible refrigerator and freezer compressors rated from 1/4 to 1/3 HP at 115V. It combines the relay, overload protector and start capacitor in one pre-wired unit.
Pros
- Combines 3 starting components
- Includes 3 kits
- Clear HP and voltage range
Cons
- Not universal
- Requires wiring and part-number checks
The Swess RCO410 is the best overall pick when your refrigerator or freezer uses a compatible 115V compressor rated from 1/4 to 1/3 HP. Its stated capacitance range is 243 to 292 MFD, and the kit is built around compressor starting rather than normal operating noise.
This is a 3-in-1 replacement. Each unit combines a relay, overload protector and start capacitor, so you do not need to match those three starting components separately when the RCO410 specifications fit.
The package contains 3 RCO410 kits. That can suit a repair shop, a property owner with several compatible appliances or a buyer who wants a matching spare.
It can also be more than a single refrigerator repair requires.
Swess lists replacement numbers including TJ90RCO410, AP4503017, 600-410, ERP410, HS410, URC0410 and RCO-410. Treat those numbers as a starting point, then confirm the compressor HP, 115V operating voltage and wiring arrangement.
The pre-wired design may simplify the replacement, but this remains an electrical repair part. Unplug the appliance and follow the wiring diagram.
Choose another product if your compressor is outside the stated HP range or uses different voltage.
2. ATMA SUPPLY W10189190 and W10662129: best for Whirlpool and Kenmore matches
ATMA SUPPLY W10189190 TSD2 Refrigerator Start Device W10662129: Best for Whirlpool and Kenmore part matches
- W10189190 start relay and overload
- W10662129 run capacitor
- Surface-mount design
- 2-piece package
This 2-piece replacement combines a W10189190 start relay with a W10662129 run capacitor. It is a practical choice when your refrigerator's original part numbers match the listed replacements.
Pros
- Includes relay and capacitor
- Long replacement-part list
- Surface-mount design
Cons
- Model fit must be confirmed
- Does not state a universal capacitance match
The ATMA SUPPLY set is a strong choice when the original refrigerator parts match W10189190 and W10662129. It includes 1 W10189190 start relay and 1 W10662129 capacitor, giving you a matched two-piece replacement rather than a standalone capacitor.
The W10189190 part covers the compressor overload and start relay. Its listed replacement numbers include WPW10189190, 2319793, W10197427, W10197428, 241941003, 2255198 and PS11740412, among others.
The W10662129 part is a run capacitor with replacement numbers including WPW10662129, 2169373, 09100136, 4356995, 4357055, AP6023677 and PS11757023. Confirm the complete part number, not only the refrigerator brand.
This set uses a surface-mount design and screw connector. That matters if your original components use a different mounting or connection style.
The set is described for Whirlpool, Kenmore, Amana and other compatible refrigerators and freezers, but model verification remains necessary.
Choose it when both replacement numbers match your appliance. If only the capacitor has failed and the relay is different, compare the original assembly before buying the two-piece set.
3. BOJACK 120 uF 250V AC: best for a high-capacitance run capacitor
BOJACK Run Capacitor 120 uF 250V AC: Best for 120 uF motor capacitor needs
- 120 uF capacitance
- 250V AC rating
- 5% tolerance
- CBB60 cylindrical body
The BOJACK is a single 120 uF, 250V AC CBB60 run capacitor for a matching electrical specification. Its cylindrical body measures 1.97 in wide by 4.06 in high.
Pros
- High 120 uF value
- 250V AC rating
- 5% tolerance
Cons
- Not a refrigerator-specific kit
- Exact original specifications are required
The BOJACK is the right type of pick when your original component calls for 120 uF at 250V AC. It is a CBB60 cylindrical motor run capacitor with 5% tolerance and a rated frequency of 50/60 Hz.
Its body measures 1.97 in wide by 4.06 in high, and it uses a snap-in mount. The product is made from aluminum and plastic, with a stated upper temperature rating of 70 °C.
BOJACK describes this capacitor for AC unidirectional motors, refrigerators, air conditioners and air compressors. That broad use makes the electrical match especially important.
Do not choose it because the appliance is a refrigerator alone.
This is a single standalone capacitor. It does not include a start relay or overload protector, so it suits a repair where the original starting components remain correct or where the capacitor itself is the required replacement.
The 120 uF value is much higher than the 12 uF values in several other picks here. That difference is decisive.
Read the original capacitor label and compare the wiring terminals, dimensions and voltage before installation.
4. Kamrexi WPW10350564: best for Whirlpool-family 12 uF spares
Kamrexi 2 Pack WPW10350564 W10350564 Refrigerator Compressor: Best for Whirlpool-family 12 uF spares
- 12 uF capacitance
- 180V rating
- 2-pack
- Polypropylene rectangular body
This 2-pack suits compatible Whirlpool, Maytag and Kenmore refrigerator models using a 12 uF, 180V run capacitor. One can serve as a spare when the same part is required.
Pros
- Two-capacitor pack
- Clear 12 uF and 180V values
- Snap-in mounting
Cons
- Only fits matching systems
- No relay or overload included
The Kamrexi 2-pack suits compatible Whirlpool, Maytag and Kenmore refrigerators that use a 12 uF, 180V run capacitor. Its rectangular polypropylene body uses snap-in mounting.
The package includes 2 capacitors. You can use one for the current repair and keep the second as a spare, or replace two matching capacitors when the appliance design calls for them.
The second unit is useful only if another compatible repair needs the same specifications.
Kamrexi identifies the part with WPW10350564 and W10350564. The stated compatible model examples include WRS325SDHZ, WRS321SDHZ, WRX735SDHZ, WRF535SWHZ and WRB322DMBM, along with other major appliance models.
This is a run capacitor only. It does not include a relay or overload protector, so it will not replace a complete start-device assembly.
Match the 12 uF capacitance and 180V rating before treating it as a substitute.
Choose this set when the part number and electrical values agree. If your appliance requires 250V, 120 uF or a different connector, this is the wrong direction even if the refrigerator brand appears compatible.
5. Seentech TSD2 assembly: best for matched Whirlpool TSD2 repairs
Seentech 2319792 W10197428 W10189190 TSD2 Overload: Best for matched Whirlpool TSD2 repairs
- Start relay, overload and run capacitor
- 115V rated voltage
- 12 uF, 250V run capacitor
- For compressors up to 1/4 HP
This combination part includes a start relay, overload and 12 uF, 250V run capacitor for compatible Whirlpool and Kenmore refrigerator systems. It is limited to compressors at or below 1/4 HP.
Pros
- Relay, overload and capacitor together
- Detailed electrical values
- Long replacement-part list
Cons
- Will not work above 1/4 HP
- Model fit must be checked
The Seentech combination part suits compatible Whirlpool and Kenmore refrigerators that require a W10189190 start relay, overload and W10662129 run capacitor. It includes those functions in one pack and lists a 12 uF, 250V run capacitor.
The electrical limits are clear: rated voltage is 115V, maximum voltage is 142V, minimum voltage is 85V, starting current is 12A and frequency is 50/60Hz.
The most important compressor limit is that it will not work when compressor power exceeds 1/4 HP.
The replacement numbers include 2319792, W10197428, W10189190, 2264017, W10662129, 2255198, 2319793 and many related numbers. Model examples include several ASD2522 refrigerator variants.
This assembly uses screw mounting and has a normally closed contact type. Those details help distinguish it from plug-in relay assemblies.
Compare the old component's physical connection and wiring before ordering.
Pick Seentech when your model, part numbers, voltage and compressor HP match. It is less flexible than a general replacement because the 1/4 HP ceiling rules out larger compressors.
6. BlueStars W10613606: best for W10613606 replacement matches
BlueStars W10613606 Refrigerator Compressor Start Relay: Best for W10613606 replacement matches
- W10613606 relay and capacitor
- Plug-in connection
- 2-pack
- Fits selected Whirlpool-family models
This BlueStars option fits selected Amana, Kenmore, Maytag, Whirlpool and related models when the W10613606 replacement number matches. Its plug-in connection is different from screw-mounted combinations.
Pros
- Plug-in connection
- 2-pack
- Broad replacement-number list
Cons
- No capacitance value stated
- Exact model and measurements matter
The BlueStars W10613606 assembly fits selected Amana, Kenmore, Maytag, Whirlpool, KitchenAid, Jenn-Air, Litton, Crosley, Dacor, Admiral, Hardwick, Magic Chef and Inglis models when the replacement number matches.
It combines a compressor start relay and capacitor and is supplied as a 2-pack. The connection is plug-in, with socket or plug-in mounting, so it is a different installation style from the screw-mounted Seentech and ATMA SUPPLY assemblies.
The replacement numbers include 14217273, 67003186, 67003764, 67005560, 67005561, 8171210, 8208290, W10416065, W10613606VP and PS8746522. Example model numbers include several Kenmore 596-series and Whirlpool GB2-series refrigerators.
The product information does not state a capacitance value. That means the model number, connection style and physical match carry more weight during selection.
Compare the old relay and capacitor assembly carefully before ordering.
Choose BlueStars when W10613606 or one of its replacement numbers matches your refrigerator. Do not substitute it for a 12 uF or 120 uF capacitor based on capacitance alone because this is a matched relay-and-capacitor assembly.
7. Formiden WR55X24064: best for GE 12 uF matches
Formiden WR55X24064 Refrigerator Capacitor for GE: Best for GE 12 uF capacitor matches
- 12 uF capacitance
- Rectangular snap-in body
- 4.5 mm connection port
- Selected GE refrigerator compatibility
This single Formiden capacitor is intended for selected GE refrigerators using a 12 uF replacement. Its rectangular body measures 1.06 in wide by 1.57 in high, with a 4.5 mm connection port.
Pros
- GE replacement numbers are listed
- Compact rectangular body
- 12 uF value
Cons
- Only one capacitor
- GE model and size checks are required
The Formiden WR55X24064 is a compact choice for selected GE refrigerators that use a 12 uF compressor run capacitor. It replaces numbers including WR55X20800, WR55X23731, WR62X20693, WR62X79, WR62X10018, WR62X10040, WR62X10048 and WR87X27279.
Its rectangular aluminum-and-plastic body measures 1.06 in wide by 1.57 in high, and the connection port is 4.5 mm. It uses snap-in mounting and comes as 1 capacitor.
That small rectangular shape suits a tight space near the compressor, but size is only one part of the match. The 4.5 mm terminals must seat properly, and the body must clear nearby parts once fitted.
Example compatible GE models include CTX21EABRRWW, GTS16GTHCRWW, CTT24GATHRAD, TFX20JABKAA, GCR23YLRDWW, GNE25JGKJFWW, GFE26JSMAFSS and GSH22JFTDWW.
The full model match still matters because GE uses many capacitor part numbers. A familiar model name or a close looking body does not prove the electrical value or wiring is the same.
This is a capacitor replacement, not a complete start relay and overload assembly. Choose it when the original component's part number, 12 uF value, connection port and body size agree.
For care, keep the connection area clean and dry, and check that the snap-in terminals remain firm during routine access to the compressor area. Unplug the refrigerator before any replacement work, and stop if the old part number or terminal layout cannot be confirmed.
What should you check before buying a refrigerator capacitor?
Check the original capacitor's capacitance and voltage, then verify the refrigerator model, replacement part number, compressor HP and connection style. These checks prevent the most common mismatch between a physically similar capacitor and a usable one.
Capacitance must match the compressor system
Capacitance is measured in microfarads, written as uF or MFD. The picks here range from 12 uF to 120 uF, while the Swess RCO410 states a 243 to 292 MFD hard start range.
Those values are not close substitutes. A 12 uF run capacitor, a 120 uF motor run capacitor and a 243 to 292 MFD hard start kit serve different electrical requirements.
Read the old capacitor label if it is safe to do so. If the label is damaged or the value is unclear, use the refrigerator's service information or ask a qualified technician.
Voltage is a required safety match
Voltage tells you the electrical level the component is designed to handle. The products here include 115V, 180V, 250V AC and a 250V run capacitor used within a 115V assembly.
Do not assume that a higher number automatically makes a capacitor suitable. The voltage, capacitance, capacitor type and compressor circuit must work together.
Part numbers narrow the search
Part numbers are often more reliable than brand names. The ATMA SUPPLY and Seentech options center on W10189190 and W10662129, while the Kamrexi uses WPW10350564 and W10350564.
The BlueStars assembly centers on W10613606, and the Formiden capacitor centers on WR55X24064. Compare the full number, including letters and digits, because similar numbers can identify different components.
Connection and mounting style affect installation
The products use several connection styles, including screw, plug-in and snap-in mounting. A part with the correct electrical value may still be unsuitable if its terminals or physical mounting do not match the original.
Take a clear photo of the old assembly before disconnecting anything. Note where each wire connects, then follow the replacement part's wiring diagram.
Can a compressor capacitor fix a warm refrigerator?
A correctly matched capacitor may help when a failed run capacitor or starting component stops the compressor from starting. It will not fix every warm-fridge problem, including sealed-system faults, control problems, blocked airflow or a failed compressor.
Heat is a symptom, not a diagnosis. The same warm cabinet can come from a compressor that will not run, a control board that never calls for cooling, a fan fault, a blocked vent, or a sealed system that cannot move heat.
For background, read what is a fridge compressor and compare the compressor role with the capacitor and relay. That helps explain why a small electrical part can affect the whole cooling cycle, and why it cannot repair a mechanical or sealed-system fault.
A refrigerator that hums without cooling may have a starting issue, but the symptom alone does not identify the failed part. A hum can mean the compressor is trying to start, struggling against a load, or receiving power without normal operation.
Do not treat humming as proof that a capacitor is the only fault. Record whether the fan runs, whether the compressor clicks, hums or stays silent, and whether the cabinet was cooling normally before the change.
If the compressor will not start at all, a failed starting component is one possibility to check. If it starts and runs but the cabinet stays warm, look beyond the capacitor toward airflow, controls and the sealed system, because a new capacitor will not correct those faults.
If your compressor is loud, the cause may involve vibration, mounting, airflow or normal cycling. See Why Is My Smart Refrigerator Compressor Loud? for smart refrigerator noise symptoms and Why Is My Frigidaire Refrigerator Compressor Loud? for Frigidaire-specific troubleshooting context.
Noise also needs context before you spend on parts. A capacitor aimed at starting performance should not be expected to quiet a compressor whose noise comes from mounting, vibration, airflow or normal cycling.
That distinction matters because a fridge can be noisy and still cooling, or quiet and warm. Match the part to the fault you have actually confirmed, and pause for a qualified technician if the compressor, controls or sealed system may be at fault.
How do you replace a refrigerator compressor capacitor safely?
Unplug the refrigerator before opening the compressor area, protect food that could spoil, and discharge the old capacitor with the correct procedure before handling its terminals. Wear work gloves and stop if the wiring or component identity is unclear.
Work from a clear, dry area and keep tools and loose parts away from the compressor compartment. A tidy workspace makes it easier to refit each wire to the same terminal and avoid leaving a connector loose.
A capacitor can retain electrical energy after the refrigerator is unplugged. That residual charge is why discharge is a separate step, not an optional extra, so treat every removed capacitor as charged until you have followed the correct procedure for your appliance.
Record the old part number, capacitance, voltage, terminal arrangement and mounting style before choosing a replacement. A photo of the labels and wiring, taken before anything is disconnected, is a simple way to keep that record accurate.
Compare the photo against the replacement diagram as you work. If terminal positions, wire colours or connector types do not line up, stop and recheck the part number and model rather than forcing a close fit.
The Swess RCO410, ATMA SUPPLY and Seentech options combine multiple starting components, so their wiring must match the intended refrigerator system. Standalone parts such as BOJACK, Kamrexi and Formiden require the original circuit to use the same capacitor type.
That difference is practical. A combined assembly changes more of the starting circuit at once, while a standalone capacitor leaves the relay and overload in place, so the existing wiring must already suit the part you are fitting.
After fitting, reconnect only when the mounting is firm, terminals are secure and no tools or packaging remain in the compartment. Then plug in, listen for normal starting behaviour, and watch the cabinet temperature over the next hours rather than judging the repair from the first few minutes.
For a complete compressor replacement rather than a capacitor repair, follow our guide on how to replace refrigerator compressor. A compressor job is a larger repair and may require sealed-system service.
If the wiring diagram is missing, the old part cannot be identified, or the compressor shows signs of a larger fault, hand the job to a qualified appliance technician. A correct part fitted to the wrong wiring is not a safe repair.
Which fridge compressor capacitor should you choose?
Choose the Swess RCO410 for a compatible 115V, 1/4 to 1/3 HP refrigerator or freezer compressor when a 3-in-1 hard start kit fits. Choose ATMA SUPPLY or Seentech when the W10189190 and W10662129 numbers match.
Start with the failed component, not with the brand on the fridge door. If the relay, overload, and start capacitor are all part of the starting problem, a combined assembly reduces the number of separate matches you have to make.
If only a run capacitor has failed, a standalone part keeps the repair focused. That also means the rest of the starting circuit must already be correct, because a new capacitor cannot correct a faulty relay or overload.
Choose BOJACK for a confirmed 120 uF, 250V AC run capacitor. Choose Kamrexi or Formiden for confirmed 12 uF refrigerator capacitor matches, with Kamrexi aimed at Whirlpool-family parts and Formiden aimed at selected GE replacements.
Those capacitance values point in very different directions. A 12 uF part and a 120 uF part may share a similar purpose in plain language, but they are not interchangeable in a compressor circuit.
Connection style is the next practical filter. Screw, plug-in, and snap-in parts can all be right, but only when the original assembly uses the same style and the terminals match the wiring in place.
Check the full mechanical picture too. Body size, mounting position, and clearance near the compressor affect whether a correct electrical part can actually be fitted and left in daily service.
For home use, the most useful choice is often the one that matches the old label exactly and can be fitted without adapting the wiring. For a workshop or a home with several similar appliances, a pack that contains a spare can be easier to keep on hand, provided another appliance uses the same specification.
The best fridge compressor capacitor is the one that matches the complete electrical and mechanical specification. If you cannot confirm the capacitance, voltage, part number and compressor requirements, pause the repair and ask a qualified appliance technician.
That pause protects the compressor as well as the fridge. A substitute chosen on shape alone can leave the original fault in place, while a confirmed match gives a clear starting point for checking whether cooling returns.
Our top 3 picks at a glance
-
1
Best for compatible 115V hard startsSwess RCO410 3 in 1 Compressor Hard
9.7/10 our score
See it on Amazon -
2
Best for Whirlpool and Kenmore part matchesATMA SUPPLY W10189190 TSD2 Refrigerator Start Device W10662129
9.7/10 our score
See it on Amazon -
3
Best for 120 uF motor capacitor needsBOJACK Run Capacitor 120 uF 250V AC
9.2/10 our score
See it on Amazon
Frequently asked questions
What is the best fridge compressor capacitor?
The Swess RCO410 is the strongest general pick here for a compatible 115V refrigerator or freezer compressor rated from 1/4 to 1/3 HP. It includes a relay, overload protector and start capacitor.
For other systems, choose by the original capacitance, voltage, part number and compressor specifications.
How do I match a refrigerator compressor capacitor?
Match the original capacitor's capacitance and voltage first, then confirm the refrigerator model, replacement part number, compressor HP and wiring connection. A 12 uF capacitor is not interchangeable with a 120 uF capacitor, and a higher voltage rating alone does not prove compatibility.
Can a run capacitor replace a start capacitor?
No. A run capacitor and a start capacitor serve different roles, even though both store electrical energy.
Use the part type specified for your compressor system.
Some replacement kits combine a start capacitor, relay and overload, while other parts are run capacitors only.
Is a hard start kit the same as a compressor capacitor?
Not always. A hard start kit can combine a start capacitor with a relay and overload protector, while a compressor capacitor may refer only to a run capacitor.
Check whether the repair requires one capacitor or a complete starting assembly.
Should I replace a refrigerator capacitor myself?
Only if you understand appliance electrical repairs and can follow the correct wiring diagram. Unplug the refrigerator before installation, protect food that could spoil, and use a qualified repair technician if the part, wiring or compressor specifications are unclear.
About this guide: Our look at fridge compressor capacitors draws on maker specs, materials and what owners report. See how we research.


