5 Best Frigidaire Refrigerator Door Bin Replacement (October 2026)
The best Frigidaire refrigerator door bin replacements include the ALVAR 242126602 Refrigerator Door Bin for Frigidaire for LFSS and FGSS owners, the ZHIRENYONG for older top or bottom rails, and the M Motico 2 PACK UPGRADE 240323001 Refrigerator Door for FFHS2611 households.
On this page (9 sections)
- How do you choose the best Frigidaire refrigerator door bin replacement?
- Which Frigidaire bin suits each model and shelf position?
- What measurements matter for a replacement door bin?
- How do you confirm model and part-number compatibility?
- How do you remove and fit a replacement bin?
- How can you care for a replacement bin?
- What mistakes lead to the wrong replacement?
- Should you repair a cracked bin or replace it?
- Which Frigidaire refrigerator door bin replacement should you choose?
The best Frigidaire refrigerator door bin replacement depends on the refrigerator model, original part number, shelf position and dimensions. ALVAR’s 242126602 bin is for certain bottom shelves, while the 240356401 options fit specific upper positions.
A door bin may look like another shelf from the same brand but attach differently or fit a different part of the door. Before shopping, find your fridge’s full model number, look for a part number on the broken bin, and measure its length, depth and height.
If you want a wider view of common replacement styles, start with our best refrigerator door bin replacements guide. This page focuses on Frigidaire-compatible parts, including a rack bar that is not a full bin.
Our picks at a glance
-
1
Best for LFSS and FGSS ownersALVAR 242126602 Refrigerator Door Bin for Frigidaire
9.6/10 our score
See it on Amazon -
2
-
3
Best for FFHS2611 householdsM Motico 2 PACK UPGRADE 240323001 Refrigerator Door
9.3/10 our score
See it on Amazon
- 4
Check itM Motico 2 PACK UPGRADED 240356401 Refrigerator Door
Best for upper trough storage - 5
Check itSENMEDO 2 Pack Upgraded 240356401 Refrigerator Door
Best for side-by-side top shelves
How do you choose the best Frigidaire refrigerator door bin replacement?
Match the original part number first, then confirm the position and dimensions. These checks narrow the choice more reliably than the brand name alone, since the five options here serve different door locations and use different part numbers.
Find the full model number on the refrigerator’s identification label, then compare it with the compatible model families for the replacement. Model suffixes can matter, so use the entire model number rather than stopping at a familiar prefix.
If the old bin has a molded or printed part number, use it as a second check. Several replacement numbers in this roundup are explicitly incompatible with one another, including ALVAR’s 242126602 and M Motico’s 240323001.
Measure the old bin at its widest points. Record the length, depth and height, and note whether the front edge, side hooks or mounting shape differ from what a simple measurement captures.
Finally, identify the exact position. A bin for the bottom of the refrigerator door cannot be assumed to fit the top.
A rack bar is also a different replacement from a complete bin, even if both hold items on a door.
| Product | Best for | Part number | Size | Position | Our score |
|---|---|---|---|---|---|
| ALVAR 242126602 Refrigerator Door Bin for Frigidaire | LFSS and FGSS owners | 242126602 | 16 x 5.5 x 5-3/4 in | Bottom 2 refrigerator door shelves | 9.6 |
| ZHIRENYONG | older top or bottom rails | 240534901 | Top and bottom racks, not middle bar | 9.5 | |
| M Motico 2 PACK UPGRADE 240323001 Refrigerator Door | FFHS2611 households | 240323001 | Bottom refrigerator door shelves | 9.3 | |
| M Motico 2 PACK UPGRADED 240356401 Refrigerator Door | upper trough storage | 240356401 | 15.38 x 6.69 x 5 in | Upper refrigerator door trough | 9.2 |
| SENMEDO 2 Pack Upgraded 240356401 Refrigerator Door | side-by-side top shelves | 240356401 | 15.25 x 6.5 x 5 in | Top 2 side-by-side refrigerator door shelves | 8.9 |
Which Frigidaire bin suits each model and shelf position?
Choose by fit pattern, not by a general “Frigidaire compatible” label. The options below fit distinct part numbers and locations; the most useful pick for you is the one whose model, number, dimensions and position all line up.
ALVAR 242126602 Refrigerator Door Bin for Frigidaire: Best for LFSS and FGSS owners
- Part number 242126602
- For the bottom 2 door shelves
- 16 x 5.5 x 5-3/4 in
- Pack of 2
This 2-pack is for compatible Frigidaire and Electrolux models that use part 242126602 on a bottom refrigerator door shelf. Check your full model number and all 3 dimensions before choosing it.
Pros
- Part number and dimensions are stated
- Includes 2 bins and a soda can organizer
- Model examples are provided
Cons
- Does not fit the top 2 door shelves
- Not compatible with parts 240323001, 240323002 or 240363701
ALVAR’s 242126602 is the clearest choice when the broken piece is one of the bottom 2 refrigerator door shelves and the full model uses this part. The bin measures 16 x 5.5 x 5-3/4 in, so compare all three dimensions before ordering.
Compatible examples include FFSS2615, FFSS2625, FGSS2635 and LFSS2612 families, along with some LGHX and DGHX variants. The examples are a starting point, not a substitute for checking the full model suffix.
The 2-pack includes a soda can organizer. This option is a poor match for top shelves, and it does not replace 240323001, 240323002 or 240363701.
ZHIRENYONG: Best for older top or bottom rails
- Part number 240534901
- 2-pack shelf rack bars
- 1.75 in guard height
- 4.5 in depth
These replacement rack bars suit some Frigidaire models in the FRT18, FFTR18, FFHT18, FFTR2, FRT21, CRT18, CRTE18, CFHT18 and FFHI18 families. Measure the old bar and confirm that the middle position is not the one you need.
Pros
- Part number and depth are stated
- Fits some top or bottom rack positions
- Pack of 2
Cons
- Does not fit a middle door bar
- Maximum length is 24.75 in, so measure first
ZHIRENYONG’s 240534901 is a rack bar, not a complete storage bin. It suits certain top or bottom rack positions on models in families such as FRT18, FFTR18, FFHT18, FRT21 and FFHI18.
The bar has a 4.5 in depth and a maximum length of 24.75 in. Measure the old bar, especially its depth, and confirm you are not repairing the middle door position.
Choose it when the broken component is the retaining rail itself. Skip it if you need a container with a floor and sides, or if the damaged bar is in the middle position.
M Motico 2 PACK UPGRADE 240323001 Refrigerator Door: Best for FFHS2611 households
- Part number 240323001
- Also replaces 240323002 and 240323007
- 15.95 in maximum length
- Pack of 2
This 2-pack fits specific Frigidaire models that use 240323001 or listed alternate part numbers. It is for the bottom refrigerator door shelves, not the freezer door, and is not compatible with LFSS or FGSS model prefixes.
Pros
- Alternate part numbers are listed
- Dimensions and door position are stated
- Pack of 2
Cons
- Does not fit part 240363701 or 242126602
- Not compatible with model numbers beginning LFSS or FGSS
M Motico’s 240323001 is for compatible bottom refrigerator door shelves and replaces 240323002 and 240323007, among other listed numbers. Its maximum length is 15.95 in, with a front height and depth of 4 in.
The stated compatible examples center on FFHS2611 variants. It is not suitable for refrigerators with model numbers beginning LFSS or FGSS, and it does not replace 240363701 or 242126602.
This is a practical fit for an FFHS2611 owner whose old bottom bin matches the number and measurements. Skip it for the freezer door or when your model begins with LFSS or FGSS.
M Motico 2 PACK UPGRADED 240356401 Refrigerator Door: Best for upper trough storage
- Part number 240356401
- Replaces 240356402 and other listed numbers
- 15.38 x 6.69 x 5 in
- Pack of 2
This 2-pack is for an upper refrigerator door trough and models that use part 240356401 or its listed replacements. Measure the existing bin because a shorter 13 in shelf needs a different part.
Pros
- Lists replacement part numbers and model examples
- Dimensions are stated
- No tools are needed for installation
Cons
- Not for bottom bins
- A 13 in shelf needs another part
M Motico’s 240356401 bin fits an upper door trough, with dimensions of 15.38 x 6.69 x 5 in. It replaces several related numbers, including 240356402, 240356405 and 240356406.
Compatible examples include FFHS2611 and FFSS2614 variants. The maker’s fit guidance also calls out a shorter 13 in shelf as requiring a different part, so length is an especially useful check here.
This option suits a buyer whose upper trough and part number align with those details. It is not a bottom-bin replacement, and a 13 in original shelf is a reason to keep looking.
SENMEDO 2 Pack Upgraded 240356401 Refrigerator Door: Best for side-by-side top shelves
- Part number 240356401
- 15.25 x 6.5 x 5 in
- For top 2 shelves on side-by-side refrigerator doors
- Pack of 2
SENMEDO’s 2-pack replaces 240356405 and 240356406 on compatible Frigidaire, Gibson, Kenmore, Crosley and Westinghouse models. Compare its dimensions with your bin and confirm that you need a top shelf.
Pros
- Part number and dimensions are stated
- Provides a long list of compatible model families
- No tools are needed for installation
Cons
- Only for the top 2 refrigerator door shelves
- Model compatibility still needs confirmation
SENMEDO’s 240356401 option measures 15.25 x 6.5 x 5 in and is intended for the top 2 shelves on a side-by-side refrigerator door. It replaces 240356405 and 240356406 on compatible models.
Its listed model families include BFHS2611, FFHS2611, FFHS2612, FFHS2622, FFSS2614 and FFUS2613. The stated dimensions differ from M Motico’s 240356401 bin, so the shared part number does not make the two options interchangeable by assumption.
Choose this version when your old bin matches its size and upper position. Skip it for bottom shelves or if your model and part number do not check out.
What measurements matter for a replacement door bin?
Measure the old bin’s length, depth and height, then compare those numbers with the replacement’s stated size. A close match in length alone does not confirm that the hooks and body will sit in the door correctly.
Measure the bin from side to side for length, front to back for depth, and bottom to top for height. If the bin is cracked, use its intact side or compare measurements with the space between the door supports.
Use care with maximum dimensions. M Motico gives 15.95 in as the maximum length for its 240323001 bin, while other options give a set of dimensions.
Treat those measurements according to what they describe.
Do not round a near match up and assume it will fit. ALVAR specifically warns that even a 1/8 in measurement difference can affect fit, which makes careful measuring worthwhile.
How do you confirm model and part-number compatibility?
Compare the full refrigerator model and the original part number against the replacement’s fit details. A compatible brand name is only a broad clue, because one Frigidaire refrigerator can have different bins across the door.
Check the model label on the appliance, not just a receipt or a shortened model name. Keep every letter and digit in the suffix, then compare the whole code with the model examples.
If the old bin’s number is missing or unreadable, use the refrigerator model to identify the proper part through Frigidaire or a parts supplier. You can also compare the broken bin’s location, dimensions and attachment shape, but those checks should support model identification rather than replace it.
Pay attention to exclusions. M Motico’s 240323001 option excludes LFSS and FGSS model prefixes; ALVAR’s 242126602 does not replace 240323001, 240323002 or 240363701.
For another brand-specific comparison, see our guides to the Samsung refrigerator door bin, LG refrigerator door bin and Whirlpool refrigerator door bin replacement. If you are weighing appliance brands more broadly, our Frigidaire vs GE refrigerator guide covers that choice.
How do you remove and fit a replacement bin?
Clear the bin, remove it in the direction its supports allow, and fit the replacement without forcing it. Most door bins hang, slide or hook into supports, but the exact movement depends on the refrigerator and the bin shape.
Take food and containers out first. If a cracked bin is still holding items, unload it before lifting so the damaged plastic does not flex under weight.
Look at how the old bin engages the door. A replacement should line up with the same supports and sit level; some options in this roundup hook or slide into place without tools.
Before loading it, press lightly on the empty bin and check that both sides are seated. If it shifts, tilts or resists, remove it and recheck the number, size and position instead of pushing harder.
Return items gradually. Heavy bottles and jars create more force at the supports than light packages, so place heavier containers where the refrigerator’s storage layout is designed to hold them.
How can you care for a replacement bin?
Keep the bin clean, seated and loaded within the door’s practical limits. Routine checks can help you notice a loose fit or a new crack before the bin drops its contents.
Remove the bin for cleaning only if its attachment allows it to come off safely. Wash away spills, dry it before refitting, and make sure the attachment points are not blocked by food or debris.
Avoid slamming the door with tall containers wedged against the bin. Check that bottles and cartons sit below the edge and do not push against the door liner when the door closes.
Inspect the corners and hooks now and then, especially if the bin carries heavy containers. A new crack near an attachment point is a sign to move the contents and recheck the fit.
What mistakes lead to the wrong replacement?
The most common mistake is buying by brand or appearance without confirming the part number, position and dimensions. Several of these bins look broadly similar but are designed for different parts of the door.
- Matching only the brand: “For Frigidaire” does not tell you whether the bin fits your particular model.
- Ignoring the door position: Top, bottom and middle positions can use different bins or rails.
- Comparing only length: Depth, height and the shape of the attachment points matter too.
- Mixing up related part numbers: The 242126602 and 240323001 options have explicit incompatibilities.
- Assuming identical part numbers mean identical dimensions: The two 240356401 options here have different measurements and stated fit details.
- Forcing a near fit: A bin that does not seat naturally may be the wrong replacement or may be in the wrong position.
If any one of the checks disagrees, pause and identify the original part before ordering. A short compatibility check is easier than dealing with a bin that will not attach securely.
Should you repair a cracked bin or replace it?
Replace a bin when a crack affects its support, shape or ability to hold food securely. Small surface marks may not change fit, but a split corner or damaged hook can make a loaded bin unstable.
Move heavier containers to an intact shelf while you identify the replacement. Door movement puts repeated stress on a damaged attachment, so continuing to use a cracked bin can make the damage worse.
A new bin will not fix a damaged door support. If the replacement does not align even after you confirm its number and measurements, inspect the mounting points or ask a parts professional whether another door component is involved.
Which Frigidaire refrigerator door bin replacement should you choose?
Pick the replacement whose full model compatibility, part number, dimensions and door position all match your refrigerator. That fit check matters more than choosing between two bins that share a brand or a related part number.
Choose ALVAR 242126602 for a compatible bottom shelf, especially when your model is in its listed LFSS or FGSS families. Choose M Motico 240323001 for a matching FFHS2611 bottom bin, and skip it for LFSS or FGSS models and the freezer door.
Choose M Motico 240356401 for a compatible upper trough, or SENMEDO 240356401 when its top-shelf position and different dimensions match your old bin. Choose ZHIRENYONG 240534901 only when the broken part is a top or bottom rack bar.
If your part number or position is still uncertain, use the refrigerator model to confirm the exact replacement before ordering. For another Frigidaire maintenance part, see our guide to the best replacement water filter for a Frigidaire refrigerator, or read what a door-in-door refrigerator is.
Our top 3 picks at a glance
-
1
Best for LFSS and FGSS owners
ALVAR 242126602 Refrigerator Door Bin for Frigidaire
9.6/10 our score
See it on Amazon -
2
-
3
Best for FFHS2611 households
M Motico 2 PACK UPGRADE 240323001 Refrigerator Door
9.3/10 our score
See it on Amazon
Frequently asked questions
How do I find the right Frigidaire door bin replacement?
Find the refrigerator’s full model number and the part number for the bin you need to replace. Match the replacement part number, door position and dimensions before ordering.
Similar looking bins can have different lengths, depths and attachment points, so compare the original carefully.
Are Frigidaire door bins interchangeable?
No. These options use different part numbers and positions.
For example, 242126602 is for the bottom 2 shelves on compatible models, while the 240356401 options are for upper door positions.
Check the full model number and old bin before selecting a replacement.
Can I replace a cracked refrigerator door bin myself?
Some options in this roundup hang or slide into the door without tools. Check how the old bin attaches, then compare its shape and dimensions with the replacement before fitting it.
Don't force a bin that doesn't sit securely in the door.
What should I do if I cannot identify the broken bin’s part number?
Use the refrigerator’s full model number and measure the old bin’s length, depth and height. Compare those details with the replacement’s stated compatibility and position.
If the numbers or measurements do not match, contact Frigidaire or a parts supplier to confirm the right part.
Can I use a door bin replacement on the freezer door?
Only if the replacement is made for that freezer door and matches its part number and dimensions. The M Motico 240323001 option here does not fit the freezer side door.
Check the replacement’s stated door position before ordering.
