9 Best Ice Maker Drain Pumps (November 2026)
The best ice maker drain pumps include the EUHOMY Under Counter Ice Maker with Drain for flexible installation without a floor drain, the FUJIWARA Condensate Pump Automatic Condensation Drain Removal for wall-mounted condensate lift, and the Stropum Automatic Small Pump For Dehumidifier for small low drain needs.
On this page (8 sections)
- The ice maker drain pumps and machines we compared
- Best ice maker drain pump: side by side
- How we compared these pumps and machines
- What size drain pump do you need for your ice maker?
- Do you need a built-in pump or a standalone ice maker pump drain?
- How do you install and maintain an ice maker drain pump?
- Which brands and kits fit smart and standard setups?
- Verdict: best ice maker drain pump picks by need
The best ice maker drain pump choice depends on whether you are buying a complete machine or fixing an existing one. A built-in pump machine such as the EUHOMY top pick handles drainage as part of the system.
A standalone pump such as the FUJIWARA or Whirlpool kit is the right fix when your ice maker already works but its water has nowhere to go.
An ice maker drain pump moves melt water that gravity cannot move. That matters when the drain is above the machine, across the room or simply missing.
Our score weighs specs, features and buyer feedback against what you're shopping for.
If you are still deciding between machine types, start with our ice maker for home guide. If your machine will sit under a counter, read does an undercounter ice maker need a drain before you buy.
Our picks at a glance
-
1
Best for flexible installation without a floor drainEUHOMY Under Counter Ice Maker with Drain
9.7/10 our score
See it on Amazon -
2
Best for wall-mounted condensate liftFUJIWARA Condensate Pump Automatic Condensation Drain Removal
9.6/10 our score
See it on Amazon -
3
Best for small low drain needsStropum Automatic Small Pump For Dehumidifier
9.4/10 our score
See it on Amazon
- 4
Check itEUHOMY Under Counter Ice Maker
Best for built-in undercounter fit - 5
Check itICYGLEE Under Counter Ice Maker
Best for quick ice cycles - 6
Check itICYGLEE Commercial Under Counter Ice Maker
Best for high daily output - 7
Check itWhirlpool 1901A Ice Machine Drain Pump Kit
Best for OEM replacement - 8
Best for highest daily outputCheck it - 9
Best for compact low-lift drainCheck it
The ice maker drain pumps and machines we compared
This group mixes complete machines with built-in pumps and standalone pumps for existing units. That mix is the point.
Some readers need ice, and some already have it.
EUHOMY Under Counter Ice Maker with Drain: Best for flexible installation without a floor drain
- 110 lb ice per day
- 33 lb storage bin
- External drain pump
- LCD panel with 24-hour timer
- 3-layer insulation
A complete undercounter ice maker with an external drain pump that can move water upward or over longer distances.
Pros
- Built-in drain pump for flexible placement
- Largest bin in this group
- Self-cleaning function
Cons
- Larger footprint than smaller picks
- Needs 24 hours upright before first use
The EUHOMY suits a home bar, cafe or restaurant where a floor drain is not available. Its external drain pump can move water upward or over longer distances, which is the core job of an ice maker drain pump kit in this layout.
It makes up to 110 lb of clear ice per day, with 45 cubes every 10 to 15 minutes. A 33 lb storage bin holds the output, so you do not need to empty it as often during busy hours.
The LCD panel adjusts cube size by changing ice-making time. It also shows ambient temperature, runs a one-touch self-cleaning program and has a 24-hour timer for scheduled production.
Insulation is 3 layers, which helps ice stay frozen longer and reduces melt. A viewing window on the curved cover lets you check the bin without opening it fully.
The upgraded water filter removes impurities for clearer, drink-safe ice, and the unit runs on 110 volts with R290a refrigerant. At 17.32 x 16.93 x 31.5 inches, it needs more space than narrower picks.
Keep it upright for 24 hours before first use, and run the cleaning program twice at the start.
FUJIWARA Condensate Pump Automatic Condensation Drain Removal: Best for wall-mounted condensate lift
- 40 l/h flow rate
- 33 ft discharge head
- Probe induction
- 3W power
- Wall-mounted design
A small wall-mounted pump for ice makers and other condensate sources where water must rise high.
Pros
- Highest lift height here
- Quiet operation below 18 dB
- No standby power use
Cons
- Wall mounting needs planning
- Smaller flow than some rivals
The FUJIWARA suits an ice maker placed far below a drain point. Its 33 ft discharge head is the tallest lift in this group, so it can push water up a wall where a low-lift pump would fail.
Flow is 40 l/h, which is modest next to the Stropum and BPSSDI. For ice maker melt water, that slower rate is usually fine because melt builds up gradually rather than all at once.
Probe induction replaces a float switch, which avoids faults from a displaced float. The pump uses 3W and draws no power on standby, and FUJIWARA says noise stays below 18 dB.
It is wall-mounted and sized for AC units from 1 to 5 HP, with the ice maker listed as a compatible device. The body is white plastic and polypropylene, and the design is meant to avoid damage to existing decoration.
Installation holes are reserved, and a mounting plate can be used instead. Plan the mounting holes and tubing run before you order, since you are buying only the pump, not ice production.
Stropum Automatic Small Pump For Dehumidifier: Best for small low drain needs
- 99 GPH flow
- 16 ft max drain height
- 4 level height and flow control
- High-low water level sensor
- DC12V operation
A compact automatic pump with adjustable height and flow for ice makers and HVAC condensate.
Pros
- Adjustable flow control
- Bottom-pumping design
- Includes tubing and adapter
Cons
- 16 ft lift is below the FUJIWARA
- Very small size limits flow headroom
The Stropum suits a small setup where drain water needs to rise about 16 ft. Its 99 GPH flow and 4 level height and flow control let you tune output to the job instead of running at full speed all the time.
A high-low water level sensor starts the pump and delays shutdown for a few seconds at low water. That delay helps empty the tank more fully and reduces repeated short cycles.
The bottom-pumping design draws from the very bottom, leaving the container almost dry. At 2.1 x 2.1 x 2.5 inches and 11.2 ounces, it fits in tight spaces where a tank pump will not.
It runs on DC12V and includes a 110/240V adapter, 6.5 ft of tubing, the pump and a manual. Low-voltage operation is efficient and quiet in home or office settings.
Trade-off: 16 ft is a mid-range lift, so measure your drain height first. If you need more than 16 ft, the FUJIWARA or Whirlpool kit covers taller runs, while this pump rewards compact placement.
EUHOMY Under Counter Ice Maker: Best for built-in undercounter fit
- 100 lb ice per day
- 24 lb storage bin
- Electric drain pump
- Built-in size 14.96 x 18.47 x 33.99 in
- LCD panel and 24-hour timer
A built-in or freestanding undercounter ice maker with an electric drain pump for clean interior operation.
Pros
- Fits standard-height cabinets
- Electric drain pump
- Self-cleaning function
Cons
- 24 lb bin is smaller than the top pick
- Empty bin if pump is disconnected
This EUHOMY suits a standard-height cabinet where a built-in fit matters. For a nugget ice option in this format, compare undercounter nugget ice makers.
At 14.96 x 18.47 x 33.99 inches including adjustable feet, it is sized for undercounter or freestanding use in kitchens and bars.
It produces up to 100 lb of clear ice per day, with 40 cubes every 10 to 18 minutes. The 24 lb storage bin is smaller than the top pick, so heavy users will empty it more often during peak use.
An electric drain pump removes water without a floor drain. That helps keep the interior clean and extends the life of the machine compared with letting melt water sit inside.
The LCD panel shows ambient temperature and adjusts cube thickness by changing ice-making time. A 24-hour timer schedules production, and self-cleaning starts by holding the Timer Clean button for 5 seconds.
It runs on 115 volts at 203 watts with R290a refrigerant. If the pump is disconnected or not in use, empty the ice bin in advance.
Keep the unit upright for 24 hours before first use.
ICYGLEE Under Counter Ice Maker: Best for quick ice cycles
- 100 lb ice per day
- 24 lb bin
- Electric drain pump
- 8 to 16 minute cycles
- LCD panel with Ice Full indicator
A compact unit with fast 8 to 16 minute cycles and an electric drain pump for flexible placement.
Pros
- Fast cycle times
- Adjustable ice thickness
- 24-hour timer
Cons
- Smaller stated height needs fit check
- Needs 24 hours upright before use
The ICYGLEE suits buyers who want fast cycles in a compact cabinet. It makes 100 lb per day with a fresh batch in 8 to 16 minutes, the quickest cycle range tied in this group.
A 24 lb bin stores the ice, and 3-layer insulation plus a high-performance compressor help make slow-melting clear ice. You can adjust ice thickness for cocktails, whiskey, iced coffee or smoothies.
An electric drain pump allows flexible installation without a floor drain. The LCD panel, Ice Full indicator and Add Water reminder keep operation simple day to day.
Self-cleaning starts by holding the Clean button for 5 seconds, and a 24-hour timer schedules production around your routine. The unit is listed at 15 x 18 x 16 inches for built-in or freestanding use.
It runs on 120 volts at 198 watts with R290a refrigerant, and includes an ice scoop and basket. Confirm that the stated dimensions fit your cabinet opening, since ICYGLEE lists a short height.
Keep the machine upright for at least 24 hours and clean it twice before the first batch.
ICYGLEE Commercial Under Counter Ice Maker: Best for high daily output
- 120 lb ice per day
- 24 lb bin
- External electric drain pump
- 8 to 16 minute cycles
- Reversible door
A commercial undercounter model with the highest daily output among the ICYGLEE picks and an external drain pump.
Pros
- 120 lb per day output
- External pump for non-gravity drains
- Water shortage and ice full reminders
Cons
- 24 lb bin limits storage
- Drain pipe should sit below the machine drain
This ICYGLEE suits a commercial or busy home setup that needs more daily ice. It produces 120 lb per day with cycles of 8 to 16 minutes, which tops the other ICYGLEE model here.
An external electric drain pump handles locations where gravity drainage is not an option. That keeps the interior clean and lets you place the unit where the ice is needed, not only where a drain is handy.
The LCD panel gives water shortage and ice full reminders, so you can refill or empty the bin before production stalls. Ice thickness is adjustable by button for smoothies, cocktails and whiskey.
A reversible door lets you choose which way it opens, which helps in narrow bars and kitchens. Auto-cleaning starts by holding the Clean button for 5 seconds, and a timer schedules production.
At 20.4 x 14.96 x 33.9 inches and 115 volts, it fits undercounter or freestanding layouts. The 24 lb bin is the limit, so output outpaces storage.
ICYGLEE also asks that the drain pipe sit below the machine drain for the best experience.
Whirlpool 1901A Ice Machine Drain Pump Kit: Best for OEM replacement
- Genuine OEM part
- Pumps water up to 10 ft high
- Fits most 50 lb ice makers from 2000 or later
- Replaces multiple part numbers
- 115V corded electric
A genuine Whirlpool kit made to replace a worn pump in compatible 50 lb ice machines.
Pros
- OEM fit for compatible models
- 10 ft lift for raised drains
- Known replacement part numbers
Cons
- Only fits compatible 50 lb models
- Confirm your model before ordering
The Whirlpool 1901A suits owners replacing a failed pump in a compatible machine. It is a genuine OEM kit for most 50 lb ice makers made in 2000 or later, which matters more than raw lift numbers when fit is tight.
It pumps excess melt water up to 10 ft high. That covers a drain on a raised sink line or a nearby wall, but it will not match the FUJIWARA for tall runs.
Whirlpool lists the part numbers it replaces, including 1901 and 2185528. Match your old part number or model before ordering, since OEM fit is the whole point of this kit.
The kit is corded electric at 115V and weighs 7.9 lb. It is an above-ground style pump, so plan where it sits and how the hose runs to the drain.
Stainless steel construction and a 13 x 9.5 x 10.5 inch footprint make it a substantial replacement part. This is not a general-purpose pump, so if your ice maker is not a compatible 50 lb model, choose a standalone condensate pump instead.
Mojgar Commercial Ice Machine: Best for highest daily output
- 150 lb ice per day
- 33 lb insulated bin
- Drain pump for high drains
- Included water filter
- Stainless steel exterior
The highest-output machine here, with a drain pump, 33 lb bin and included water filter.
Pros
- 150 lb per day output
- 33 lb bin
- 24-month compressor warranty
Cons
- 290W draw is high here
- Cube size is fixed at about 0.86 in
The Mojgar suits a high-volume home bar or small cafe. It produces 150 lb of square ice per day, the most in this group, with 45 cubes per 10 to 18 minute cycle at about 0.86 inches per cube.
A 33 lb insulated bin stores that output, and 25 mm insulation helps slow melting. The drain pump moves wastewater to a high or distant drain, which keeps placement flexible.
It connects to tap water or a bottled-water supply through a self-priming system, and a water filter is included. That dual inlet helps in a garage, basement or patio without a dedicated water line.
The stainless steel exterior has a fingerprint-resistant film, and Mojgar lists operation under 50 dB. Controls adjust ice thickness and start one-touch self-cleaning, with ice-full, low-water and fault alerts.
At 15.7 x 14.9 x 29.8 inches and 51.7 pounds, it is compact for its output. At 290W, it draws more power than the 198 to 203W picks.
Mojgar includes a 24-month full-machine warranty and a 24-month compressor warranty.
BPSSDI Condensate Pump: Best for compact low-lift drain
- 100 l/h flow
- 6.6 ft lift
- 0.6L tank
- Automatic switch
- Check valve to prevent backflow
A compact automatic pump for low lifts where an ice maker or AC unit sits near its drain.
Pros
- Compact 8 in footprint
- Automatic on and off
- Low noise at about 22 dB
Cons
- Plug not included
- 6.6 ft lift is the lowest here
The BPSSDI suits a low, close drain where lift is not the issue. Its 6.6 ft lift is the lowest here, but that is enough when the drain point sits just above the machine.
Flow is 100 l/h with a 0.6L tank, so it can clear melt water promptly without a large reservoir. The automatic switch starts drainage when the tank fills and shuts off after.
A check valve prevents backflow, and the 1 inch side inlet and 0.4 inch outlet connect to commercial ice makers and similar equipment. ABS construction keeps the pump light and easy to clean.
Noise is about 22 dB, with ventilation holes for heat dissipation and shock-absorbing feet for stability. At 8 x 3.94 x 3.86 inches, it fits in tight spaces.
Trade-off: the plug is not included, so budget for that part. If your drain sits higher than 6.6 ft, step up to the Stropum or FUJIWARA, since this pump is built for short, simple runs.
Best ice maker drain pump: side by side
Lift height decides more than any other spec. The FUJIWARA lifts 33 ft, the Stropum 16 ft, the Whirlpool 10 ft and the BPSSDI 6.6 ft.
Flow decides how fast the tank empties, with the BPSSDI at 100 l/h and the Stropum at 99 GPH.
Complete machines add a second axis. Daily output runs from 100 lb on the EUHOMY and ICYGLEE built-ins to 120 lb and 150 lb on the larger picks, while bin size settles at 24 lb or 33 lb.
Power and size separate the groups too. Standalone pumps run from 3W on the FUJIWARA to 12V DC on the Stropum, while machines draw 198W to 290W and need cabinet space.
| Product | Best for | Ice per day | Bin capacity | Size | Our score |
|---|---|---|---|---|---|
| EUHOMY Under Counter Ice Maker with Drain | flexible installation without a floor drain | 110 lb | 33 lb | 17.32 x 16.93 x 31.5 in | 9.7 |
| FUJIWARA Condensate Pump Automatic Condensation Drain Removal | wall-mounted condensate lift | 9.6 | |||
| Stropum Automatic Small Pump For Dehumidifier | small low drain needs | 9.4 | |||
| EUHOMY Under Counter Ice Maker | built-in undercounter fit | 100 lb | 24 lb | 14.96 x 18.47 x 33.99 in | 9.1 |
| ICYGLEE Under Counter Ice Maker | quick ice cycles | 100 lb | 24 lb | 15 x 18 x 16 in | 8.9 |
| ICYGLEE Commercial Under Counter Ice Maker | high daily output | 120 lb | 24 lb | 20.4 x 14.96 x 33.9 in | 8.7 |
| Whirlpool 1901A Ice Machine Drain Pump Kit | OEM replacement | 8.4 | |||
| Mojgar Commercial Ice Machine | highest daily output | 150 lb | 33 lb | 15.7 x 14.9 x 29.8 in | 8.1 |
| BPSSDI Condensate Pump | compact low-lift drain | 7.9 |
How we compared these pumps and machines
We compared specs first, then fit. Lift height, flow rate, power needs and tank size tell you whether a pump can do your job.
Bin size and daily ice output tell you whether a complete machine can keep up.
We treated standalone pumps and complete machines as two separate shopping jobs. A pump buyer already owns an ice maker.
A machine buyer needs ice production, storage and drainage in one unit. Scores reflect how well each option fits the drain pump search, not only raw ice output.
We excluded any claim we could not tie to a spec or feature. Where a brand gives a warranty, noise level or cycle time, we used that figure and labeled it as the brand's claim.
What did we leave out?
We left out pumps with no stated lift height, because lift is the core purchase decision.
We also left out machines that rely only on gravity drainage, since they cannot solve the layout problem this guide addresses.
Noise, insulation and cleaning features acted as tie breakers. A pump that runs below 22 dB suits a quiet room, while 3-layer insulation on a machine reduces melt that the pump must handle.
What size drain pump do you need for your ice maker?
Answer: match the pump to your drain height first, then match flow to how fast melt water builds up. A pump that cannot reach your drain fails no matter how quiet it is.
How do you measure lift height?
What flow rate is enough?
Measure from the pump to the highest point of the hose and add headroom for bends. The FUJIWARA covers 33 ft, the Stropum 16 ft, the Whirlpool 10 ft and the BPSSDI 6.6 ft.
Ice maker melt water builds slowly, so 40 l/h from the FUJIWARA is often enough. Faster flows such as 99 GPH or 100 l/h help when you run large batches or rinse cycles often.
Tank size matters when cycles run back to back. The BPSSDI holds 0.6L, which suits steady melt, while larger tanks reduce how often the pump starts.
Do you need a built-in pump or a standalone ice maker pump drain?
Answer: buy a built-in pump machine when you are shopping for ice, and a standalone pump when your current ice maker works. That single choice saves money and avoids a forced upgrade.
When does a built-in pump win?
When does a standalone pump win?
Built-in models such as the EUHOMY and ICYGLEE picks combine ice production, storage and drainage. Our best undercounter ice maker with drain pump guide covers that group in more depth.
Standalone pumps such as the FUJIWARA, Stropum, Whirlpool and BPSSDI fix drainage on a machine you already own. That is the cheaper path when ice production is fine.
For background on how the system works, see what is a drain pump on an ice maker.
Built-in pumps also keep the interior clean by removing water on a schedule. Standalone pumps give you more choice of lift height, from 6.6 ft to 33 ft.
How do you install and maintain an ice maker drain pump?
Answer: install the pump below the ice maker outlet, run the hose to the drain with no sags, and clean the tank on a schedule. A sagging hose forces the pump to lift water twice.
Keep the unit upright for 24 hours before first use where the maker asks for it. Run the self-cleaning program twice before the first batch on the EUHOMY and ICYGLEE models.
Clean the pump tank and check the hose every few months. Scale and debris slow flow and can stall a small pump, especially the compact models with narrow outlets.
Check the sensor or float area during cleaning. A blocked probe or switch can cause short cycling, and a clean tank lets the pump empty fully.
If you are comparing machine types for a kitchen, our best undercounter ice maker for home guide helps you size the cabinet fit before you worry about the pump.
Which brands and kits fit smart and standard setups?
Answer: match the pump to the ice maker type, not the other way around. A refrigerator kit, an undercounter machine and a commercial unit each need different fittings and power.
A Best Ice Maker Kit For Smart Refrigerator fits a refrigerator that already has a water line and drain path. It is a different job from an undercounter machine with melt water to remove.
For a full refrigerator purchase, our Best Smart Refrigerator With Ice Maker guide covers models with integrated ice. Those units usually drain by gravity and do not need a separate pump.
The Whirlpool 1901A is the OEM choice for compatible 50 lb machines. The FUJIWARA, Stropum and BPSSDI are general condensate pumps that list ice makers as compatible devices.
Voltage also separates the options. The Whirlpool and BPSSDI run on 115V or 110V AC, while the Stropum uses 12V DC with an included adapter.
Verdict: best ice maker drain pump picks by need
Answer: the EUHOMY Under Counter Ice Maker with Drain Pump is the best all-in-one pick, and the FUJIWARA is the best standalone pump. Pick the Mojgar if daily volume matters most, and pick the Whirlpool if you need an OEM replacement.
Pick the EUHOMY top pick if you need ice and drainage in one unit without a floor drain. Pick the FUJIWARA if your drain sits high and your current ice maker works fine.
Pick the Stropum for a small, tunable setup under 16 ft of lift.
Pick the BPSSDI for a short, low drain where 6.6 ft of lift is enough. Pick the Whirlpool 1901A only after you confirm your model is a compatible 50 lb ice maker.
Confirm lift height, cabinet fit and power needs before you order, and your best ice maker drain pump will be the one that matches your layout on the first try.
Our top 3 picks at a glance
-
1
Best for flexible installation without a floor drainEUHOMY Under Counter Ice Maker with Drain
9.7/10 our score
See it on Amazon -
2
Best for wall-mounted condensate liftFUJIWARA Condensate Pump Automatic Condensation Drain Removal
9.6/10 our score
See it on Amazon -
3
Best for small low drain needsStropum Automatic Small Pump For Dehumidifier
9.4/10 our score
See it on Amazon
Frequently asked questions
What does an ice maker drain pump do?
It pumps melt water and rinse water out of the ice maker to a drain that may be higher or farther away. Gravity systems need a drain below the machine.
A pump solves that layout problem and helps keep the interior clean.
Can I add a drain pump to an ice maker that lacks one?
Often yes, with a standalone condensate pump matched to the ice maker's output and lift height. Check flow rate, lift height and power needs first.
Built-in pump models are simpler when you are buying new.
How high can an ice maker drain pump lift water?
It depends on the model. The FUJIWARA here lifts to 33 ft, while the BPSSDI lifts to 6.6 ft.
Measure the vertical distance to your drain point and choose a pump with headroom above it.
Do I need a drain pump if my ice maker has gravity drainage?
No, if a floor drain or sink drain sits below the machine and the hose can run downhill. A pump adds cost and parts to maintain.
Add one only when gravity drainage is impractical for your layout.
About this guide: Our look at ice maker drain pumps draws on maker specs, materials and what owners report. See how we research.



